BBastecki
Active Member
- Messages
- 14
- Reaction score
- 8
- Points
- 42
- Location
- Buford, GA
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 23
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
2007 AR230 Decal Replacement - Can’t find...
- Thread starter BBastecki
- Start date
- Messages
- 8,346
- Reaction score
- 22,907
- Points
- 862
- Location
- Northern Vermont Lake Champlain
- Boat Make
- Boston Whaler
- Year
- 1995
- Boat Model
- Other
- Boat Length
- 18
@BBastecki I dont think you will find those graphics anywhere. Mine were beat up from one of the P.O.'s. I decided to remove all graphics below the rub rail in order to properly remove the oxidation on the gelcoat around them. And buff the hull to blend it all together. Gelcoat is not oxidized beneath them. Good luck with your search.
Beachbummer
Jetboaters Admiral
- Messages
- 4,059
- Reaction score
- 2,979
- Points
- 352
- Location
- Houston TX
- Boat Make
- Yamaha
- Year
- 2008
- Boat Model
- SX
- Boat Length
- 23
I will also chime in, although unhelpfully, tell you that no stickers under the rub rail looks great on these boats !!!
If you really like the sticker, a local vinyl shop can probably make it with a picture and some measure.
If you really like the sticker, a local vinyl shop can probably make it with a picture and some measure.
BBastecki
Active Member
- Messages
- 14
- Reaction score
- 8
- Points
- 42
- Location
- Buford, GA
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 23
It was hard to find as all websites show the decal sold out, although I found it here after looking hard:
https://greatlakesskipper.com/yamaha-f2au412540-boat-graphics-decals-pair
Another question, how would anyone recommend removing the rest of the old decal before applying the new? Just use good off, or would that do more damage than good? Thanks for suggestions/feedback!
https://greatlakesskipper.com/yamaha-f2au412540-boat-graphics-decals-pair
Another question, how would anyone recommend removing the rest of the old decal before applying the new? Just use good off, or would that do more damage than good? Thanks for suggestions/feedback!
Beachbummer
Jetboaters Admiral
- Messages
- 4,059
- Reaction score
- 2,979
- Points
- 352
- Location
- Houston TX
- Boat Make
- Yamaha
- Year
- 2008
- Boat Model
- SX
- Boat Length
- 23
Heat gun and blue cleaning pad worked the best... And by best I mean I cursed the least per minute while using this method.
