• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2007 SX 210 Starter Relay Replacement

Fitzy2007

Well-Known Member
Messages
9
Reaction score
2
Points
62
Boat Make
Yamaha
Year
2007
Boat Model
SX
Boat Length
21
Can anyone share a link to a video on how to replace a starter relay for a 2007 SX 210?

Thanks!
 
Are you sure it is the starter relay. @Beachbummer shorts out the +battery cable and the +starter cable at the ECU. If the engines cranks, it is probably your relay; otherwise a corroded connection at the starter.
 
Thanks- this is very helpful. I had a similar problem with my 2006 Sea Doo jets ski and that was the fix- so I just assumed. The starboard engine would not turn over- acted like the throttle was engaged. I takes several tries before it would start- then it runs like a champ. I looked on line for a video and the newer models have a black box mounted to the back of the engine compartment that contain the starter solenoid . The 2007 SX 210 does not have that. Where would I look for a potentially corroded connection at the starter?
 
The + and - connections at the starter itself.
 
Back
Top