2015 SX240 Mooring Cover

[Zeus2013]

Hi All,

I need some help from anyone with a 2015 SX240. The mooring cover my dealer gave me is part number MAR-242NT-GY-15. However, this cover has the center section flaps made for boats with towers. I have been using this until the correct cover comes in. However, every cover they have received with part number MAR-242NT-GY-15 is made for a tower. Every web site states this is the correct part number, and yes even checked with good ole Will to confirm the part number.
Doe sanyone have the 2015 SX240 cover that can send me a picture of what the cover looks like on the boat and confirm the part number? The dealer is now telling me that cover is made that way for the bimini top. My response is no way.

Am I completely missing something and owe an apology to my dealer, or am I correct? This has been going on since May.

Regards,
Nick

 

[Scottintexas]

I could be wrong but looking at yamahasportsplaza.com you should get
Gray Item: MAR-240MC-GY-10
http://www.yamahasportsplaza.com/oe...00228ec05eb2e/sx240-high-output-mooring-cover

 

[B_Mutter]

That's the right part number. The tower boats are MAR240TRGY15. That part number you have fits both the SX and Limited while the two tower boats have different covers due to the different arches. The SX cover might/might not have 4 velcro flaps to get around the bimini poles so the bimini can be up when it's on. We sell way more snap covers than mooring covers here. We use the covers for demo purposes on a boat in the showroom for visualization. Not saying the dealer didn't do the same and just put the wrong one in the wrong box.

 

[Zeus2013]

I could be wrong but looking at yamahasportsplaza.com you should get
Gray Item: MAR-240MC-GY-10
http://www.yamahasportsplaza.com/oe...00228ec05eb2e/sx240-high-output-mooring-cover

I believe that one is for an earlier model, but thanks.

 

[Zeus2013]

That's the right part number. The tower boats are MAR240TRGY15. That part number you have fits both the SX and Limited while the two tower boats have different covers due to the different arches. The SX cover might/might not have 4 velcro flaps to get around the bimini poles so the bimini can be up when it's on. We sell way more snap covers than mooring covers here. We use the covers for demo purposes on a boat in the showroom for visualization. Not saying the dealer didn't do the same and just put the wrong one in the wrong box.

Thanks. The cover was ordered and shipped direct to me. I will need to look to see if there are and flaps. Did not initially see any.

 

[B_Mutter]

No problem @Zeus2013 . I honestly don't know if the bimini has to be lowered to get the mooring cover on. The top does need to be lowered for the white shipping cover but not for the snap covers.