2018 AR 190 transponder help

[Donny]

im looking to mount my Garmin striker plus and need ideas of how to run the wires to the transponder.

 

[FLBulldogger]

I have my transducer mounted on my ride plate on the starboard side, thru the rear drain...

 

[Donny]

How did you get to the rear drain? Did you guild it through the engine bay?

 

[Theturtle7023]

How long has that transducer been installed? How many hours?

 

[NeverAgain3]

How did you get to the rear drain? Did you guild it through the engine bay?

Do tell. New AR195 and have a Simrad Go7 I’d like to do a “non-invasive” install. I’m leaning towards iPad with Navionics+ but sonar would be nice.

 

[Donny]

Thanks for all the help. Install was a breeze. Just fit my arm down the hole in the rear compartment next to the propeller clean out and was able to fish all me wires through, well, that’s after I unscrewed the 90 degree bend plastic piece and cut it in half, then siliconed it back up. Now trying to find a remote power lead for my amp to hook up to. Seems like my radio (MA200) only have the 8 speaker wires and power and ground coming out of the back of it.

 

[FLBulldogger]

How long has that transducer been installed? How many hours?

If you are referring to my transducer it has been on for a year now with over 75 hrs on her. One drawback to an IPad would be the glare and ability to see in bright sunshine.

 

[Theturtle7023]

So I just mounted my lowrance today. It was super easy once I finally grew a pair to drill a hole in my boat. That part took me about 2 hours. Don't know what that GPS wire was coming off the dash cluster, but it worked great for a power supply.

 

[AboveTheBest]

What channel do you usually use, 1200?

VFR... Transponder... nobody?