2019 242X E-Series Nozzle Question (View Picture)

[romerolc75]

Can someone please tell me what this is. it's on the back top side of the nozzle. This is one open. They other side is still sealed. Just doesn't look right to me. Any insight would be appreciated.

 

[Sean R]

I have the same on my 2020 212S, inquiring minds want to know.

 

[Cobra Jet Steering LLC]

They use the same pump on the boat as on a pwc and that is the damn rooster tail fitting that they have on the p w c's, I block mine before I ever use the ski .

 

[Julian]

What he said ☝

Your the first person I've seen post saying their's wasn't plugged. You want to replug it!

 

[Sean R]

I am assuming if you don't plug it you're power washing the swim platform.

 

[Neutron]

If you cap it make sure is can handle lots if pressure. I tried capping it on my jetski and first time out it blew it apart. Some have tapped it and put a threaded plug in it

 

[Cobra Jet Steering LLC]

under it, and wasting a small amount forward thrust as well

 

[Flamewolf51]

I have the exact same issue on my ‘19 242 x as well. Does anyone have a suggestion about how to plug this?

 

[Cobra Jet Steering LLC]

Yes use a small hose and clamp it to the fitting then fold it over and cable tie it folded over so nothing goes out the hose, when I do P W C's I remove the hose at the swim deck slide in a plastic wire nut and then reattach the clamp and hose to the deck fitting , works fine,

 

[FSH 210 Sport]

That tap is used for the raw water wash down on the FSH series of boats... on my boat only the starboard one is used, the port one looks to just have a bolt screwed down into it.