2021 195S Bow Roller?

[bigd1634]

So I know that this topic has been talked about over and over. My understanding is that the replacement roller set for the Yamaha boats is the 3.5 inch Stoltz. I Ordered one and was told a day later that there is no more stock. I then looked at a few other sites and again, out of stock. Has anyone had issues with ordering these? I have heard of some using the 4 inch and either bending the arms out or cutting the roller down to fit. I would rather use the 3.5 that is meant for it. Has anyone used a 3 inch and added a few washers for spacing?

If the rollers are not available, has anyone had any luck with a bow guard scuff buster? If so did you get the regular size witha notch or the XL with a notch?

 

[marcham]

Following ... this stuff is almost impossible to get in ??.

 

[CaTiRo]

I received mine several weeks ago. Are you all doing a google search for "3.5 inch stoltz bow roller"?

 

[bigd1634]

I received mine several weeks ago. Are you all doing a google search for "3.5 inch stoltz bow roller"?

yes, it is marked as out of stock through multiple vendors and I cannot locate it on Amazon.

 

[DrPhil]

Ebay had a few of these, but note that it does not come with the side 'bells'. Hoping I can re-use the existing ones which should not touch much - or - eventually locate the bells.

 

[Schil]

So I know that this topic has been talked about over and over. My understanding is that the replacement roller set for the Yamaha boats is the 3.5 inch Stoltz. I Ordered one and was told a day later that there is no more stock. I then looked at a few other sites and again, out of stock. Has anyone had issues with ordering these? I have heard of some using the 4 inch and either bending the arms out or cutting the roller down to fit. I would rather use the 3.5 that is meant for it. Has anyone used a 3 inch and added a few washers for spacing?

If the rollers are not available, has anyone had any luck with a bow guard scuff buster? If so did you get the regular size witha notch or the XL with a notch?

Any luck find them with the bells?

 

[RobbieO]

So I know that this topic has been talked about over and over. My understanding is that the replacement roller set for the Yamaha boats is the 3.5 inch Stoltz. I Ordered one and was told a day later that there is no more stock. I then looked at a few other sites and again, out of stock. Has anyone had issues with ordering these? I have heard of some using the 4 inch and either bending the arms out or cutting the roller down to fit. I would rather use the 3.5 that is meant for it. Has anyone used a 3 inch and added a few washers for spacing?

If the rollers are not available, has anyone had any luck with a bow guard scuff buster? If so did you get the regular size witha notch or the XL with a notch?

So I know that this topic has been talked about over and over. My understanding is that the replacement roller set for the Yamaha boats is the 3.5 inch Stoltz. I Ordered one and was told a day later that there is no more stock. I then looked at a few other sites and again, out of stock. Has anyone had issues with ordering these? I have heard of some using the 4 inch and either bending the arms out or cutting the roller down to fit. I would rather use the 3.5 that is meant for it. Has anyone used a 3 inch and added a few washers for spacing?

If the rollers are not available, has anyone had any luck with a bow guard scuff buster? If so did you get the regular size witha notch or the XL with a notch?

Here’s what I ordered, and also ordered 4” bells

Stoltz 3.5 " Custom - Drewcraft LLC

Stoltz 3.5 " This is a custom modified RP-446 cut down to fit a 3.5" bracket Comes with RP-325 bottle cap ends, bolt, nut and washers available with different caps or without bolt upon request

drewcraft.com

 

[bigd1634]

Yes a few days after the post they were back in stock. Had it a few days later.

 

[Schil]

Following ... this stuff is almost impossible to get in ??.

Hi. I’m in ?? Too. I can’t find this 3.5 inch stoltz bow roller anywhere. Did you have any luck?
ll the US sites have them but will not ship up here.

 

[marcham]

Nope .., I'm SOL....

 

[Schil]

Nope .., I'm SOL....

I finally found where we could buy it.

https://www.hagadgetl.com/advanced_search_result.htm?main_page=advanced_search_result&search_in_description=1&keyword=Stoltz+RP-355

 

[Schil]

I finally found where we could buy it.

https://www.hagadgetl.com/advanced_search_result.htm?main_page=advanced_search_result&search_in_description=1&keyword=Stoltz+RP-355

Then I just add the RP-434 bells to it.
good to go

 

[marcham]

Is that a real business? No phone no, no address, where do they ship from?

 

[Schil]

Not sure. I tho the same but I’m trying it out. Let you know if I get it.

 

[jimbobalu]

Supposedly Drewcraft.com got 100 rollers in. Mine is in the mail due this Saturday.

 

[Schil]

Supposedly Drewcraft.com got 100 rollers in. Mine is in the mail due this Saturday.

Good morning.
drewcraft.com will not ship to Canada.

 

[Mauri_6]

Good morning.
drewcraft.com will not ship to Canada.

Hi did you get it in Canada? Or shipped here?

 

[Schil]

Hi did you get it in Canada? Or shipped here?

I ended up buying a 4 inch roller from Amazon and I just cut it with a oscillating tool. Worked fine.
bought the bells for it too.

 

[Mauri_6]

I ended up buying a 4 inch roller from Amazon and I just cut it with a oscillating tool. Worked fine.
bought the bells for it too.

Do you have any pics?