2021 195s throttle stuck after rope entanglement

[matskoviche]

Hey all!
My tow rope got caught up today. I opened up the clean out port, and was able to cut and remove all the rope around the shaft. When I started the boat back up, I noticed it was very difficult to put the boat in throttle. I was able to get the boat into the reverse position as normal, smoothly. If anyone has any advice on how to fix the throttle issue, I would greatly appreciate it. Follow up question, do you guys think it would be safe to drive it back 5 mph or so to the boat ramp to get it onto my trailer. I’m confident I can get the boat going at that speed 1and probably faster. I just don’t want to risk any further damage to the boat.

 

[cwoav8r]

Just make sure you got all the rope... is there any trailing out of the nozzle?

 

[matskoviche]

Just make sure you got all the rope... is there any trailing out of the nozzle?

Where is the nozzle? Would I get there through the clean out port or from the back of the boat. I did check my gate and was able to move it up and down by hand freely without and hang ups.

 

[cwoav8r]

Yea, at the gate where the water thrust comes out. If you checked the gate then you should have seen any rope coming out. Don't know much about SeaDoos... sorry I cant be more help.

 

[matskoviche]

Yea, at the gate where the water thrust comes out. If you checked the gate then you should have seen any rope coming out. Don't know much about SeaDoos... sorry I cant be more help.

Tyvm in any case. Just to clarify we are taking about a 2021 Yamaha 195s.

 

[cwoav8r]

Doh, I was looking at his avatar stuff...