2021 Rotax 1503 4-TEC Factory Service Manual

[ramcorpsr]

Does anyone know where I can get a hold of a Factory service manual for my Rotax 4-tec model 1503 on a 2021 HewescraftRiverRunner200. The closest dealer to my location is 1000 miles away looks like I will have to service my boat myself.

 

[Luc Lafreniere]

I may be able to help. Check your messages.

 

[TheLoweMan]

I may be able to help. Check your messages.

Luc, would you mind hooking me up, aswell?

 

[Frankwho3]

Hi Luc, Can you send me the manual as well? First time boat owner, 10 hrs on the Scarab 165ID and just got the P2245 error code. Do I leave it, fix myself, or go to the dealer? Thank you!

 

[Frankwho3]

Hi Luc, Can you send me the manual as well? First time boat owner, 10 hrs on the Scarab 165ID and just got the P2245 error code. Do I leave it, fix myself, or go to the dealer? Thank you! I have a 2021 also.

 

[Luc Lafreniere]

O2 sensors are very easy to replace. Just google it for a Sea-Doo. YouTube has many videos.

 

[Frankwho3]

O2 sensors are very easy to replace. Just google it for a Sea-Doo. YouTube has many videos.

Thank you! Will do!

 

[Frankwho3]

Hello! So I replaced the O2 sensor with the recommended GM part. Got it out and new one installed with no problem. I started the boat and error code is still there as well as the engine light. I remember reading light may still be on for a few engine cycles but the code should clear. Am I mistaken ? Should I just go out and drive it a few times? Thank you!

 

[Luc Lafreniere]

Some codes require software, but I believe this one will clear itself after some engine run time and cycles. As we discussed, it won't affect anything. So boat away and after a few hours of engine run time, if it won't clear, you can either hide the light electrical tape (lol), bring it to a dealer to clear the code, or get your own software to do it (Candoo Pro or BUDS home use). But I think it will clear itself.

 

[Frankwho3]

Some codes require software, but I believe this one will clear itself after some engine run time and cycles. As we discussed, it won't affect anything. So boat away and after a few hours of engine run time, if it won't clear, you can either hide the light electrical tape (lol), bring it to a dealer to clear the code, or get your own software to do it (Candoo Pro or BUDS home use). But I think it will clear itself.

Sounds good!! Thank you again!

 

[mscott182]

Any way I could get this service manual as well Luc? Also, new to the Rotax engines.

 

[Rhuester]

I may be able to help. Check your messages.

Luc, new owner of a RockProof with the Rotax 1503, Supercharged 250hp engine. Can you share a copy of the manual with me?