• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

2021 yamaha AR190 Performance Mods!

Oscarss

Active Member
Messages
6
Reaction score
4
Points
42
Boat Make
Yamaha
Year
2021
Boat Model
AR
Boat Length
19
So far i have installed the thrust vector x fins.

thinking about doing the ribbon delete and L13 cone.

do i need to order the Riva Racing spacer in order to do the ribbon delete?
 
So far i have installed the thrust vector x fins.

thinking about doing the ribbon delete and L13 cone.

do i need to order the Riva Racing spacer in order to do the ribbon delete?

No you do not have to buy a spacer. Just make sure to also remove the rubber grommet around the ribbon. DO NOT leave it in.
 
So far i have installed the thrust vector x fins.

thinking about doing the ribbon delete and L13 cone.

do i need to order the Riva Racing spacer in order to do the ribbon delete?

Did you ever do the Ribbon delete and L13? I was thinking about these mods as well. Would love to know the performance implications. I'm getting about 37 MPH WOT.
 
Did you ever do the Ribbon delete and L13? I was thinking about these mods as well. Would love to know the performance implications. I'm getting about 37 MPH WOT.
I have a '19 SX190. I have completed the ribbon delete and went from 7500 to 7650-7700 rpm and gained 1-2 mph. Which means around 38mph in average conditions. In the middle of summer, probably 36ish. In early spring, might see 40 when lightly loaded. I did use the Riva Racing piece.

Probably going to do the L13 this winter. Already have taken off the deflector and nozzle.
 
Back
Top