210 FSH Adding new Cleats, looking for ideas

[I know You know]

Want to add a couple of additional cleats port and starboard side towards the stern, the 210 has nothing to be able to tie fenders around that area. Has anyone added additional cleats on the 210?

 

[Weeb]

Want to add a couple of additional cleats port and starboard side towards the stern, the 210 has nothing to be able to tie fenders around that area. Has anyone added additional cleats on the 210?

I used accon quick disconnect fender mounts, there are other ones people use too. They just screw on so you don't have to get inside the hull to mount them.

 

[I know You know]

I used accon quick disconnect fender mounts, there are other ones people use too. They just screw on so you don't have to get inside the hull to mount them.

Thank you Weeb just saw them, looks like that will solve my problem. Did you mount them under gunwale?

 

[Rich NW Jboater]

I added another rod holder forward and use these, works like a champ and my cleats are open for other uses.

 

[Julian]

I added another rod holder forward and use these, works like a champ and my cleats are open for other uses.View attachment 73530

OK...what the heck are those? Cool idea to use the rod holders....and since I put a couple on the back of my X last year...I could go this route too!

 

[Rich NW Jboater]

It's called a Quick Boat Fender Kit, tried posting a link but apparently I'm to stupid to figure it out.

 

[Julian]

@Rich NW Jboater to add a link to your post and have it look nice, all you need to do is

1. Type the words you want to have shown, like "Quick Boat Fender Kit"
2. Select those words
3. then click on the "chain link" icon in the tool bar above the text area of the post, and then paste the URL of the link into the box that opens up.

The end result will look like this:

Quick Boat Fender Kit

Done.

Alternatively, you could also just paste it in "raw" like this.
https://www.amazon.com/Quick-Boat-F...sr=8-2-spons&keywords=quick+boat+fender&psc=1

 

[Rich NW Jboater]

Thanks Julian

 

[I know You know]

I added another rod holder forward and use these, works like a champ and my cleats are open for other uses.View attachment 73530

Thank you Rich

 

[ClemsonTiger]

Want to add a couple of additional cleats port and starboard side towards the stern, the 210 has nothing to be able to tie fenders around that area. Has anyone added additional cleats on the 210?

Whoa, whoa, whoa....are you saying the FSH is lacking something? No way brother, I don’t believe you, can’t be. I’m in disbelief!

 

[I know You know]

Whoa, whoa, whoa....are you saying the FSH is lacking something? No way brother, I don’t believe you, can’t be. I’m in disbelief!

Amazing that a boat would not have every single item.........what a noble thought....

 

[ClemsonTiger]

Amazing that a boat would not have every single item.........what a noble thought....

I’ll tell you what, that is a noble and unique concept. And, one of the few times I’ve actually seen someone admit it. I was under the concept they were perfect...

Bravo and Kudos!

 

[Weeb]

Thank you Weeb just saw them, looks like that will solve my problem. Did you mount them under gunwale?

I mounted them above the rub rail Don’t have a picture in my phone. I had a thread on it somewhere with pics.

 

[Liveto99]

I think those two quick fender kit items will work awesome thank you. And judging from some knots I have seen holding fenders on in the past and the height of the fenders. I think it will work better. As long as the crew can put the round peg into a round rod holder all will be good .

 

[Grover70]

I love my zig-zag cleat. East to mount, out of the way....and even my wife can figure it out
https://www.amazon.com/Brocraft-Mar...8&qid=1525647275&sr=8-16&keywords=quick+cleat