• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Please read the Classified Ads Posting Rules before Posting something for Sale!

    Boats MUST LIST A LOCATION (State)IN THE TITLE (Seems people can't read lately)-along with Make/Model/Year

Boat Stuff 212x ballast bags

nate kennedy

Jetboaters Commander
Messages
211
Reaction score
105
Points
177
Location
Rochester MN
Boat Make
Yamaha
Year
2015
Boat Model
X
Boat Length
21
replaced Factory 2015 212x ballast bags. If interested shoot me an offer on the stock bags.
 
What did you replace them with? Yeah I know this is 2 years old. LOL! My stock ones are old and in need of replacing. The outer covers are dry rotted.
 
I took off the blue waterbed fittings and got the quick connects from wake makers and fly high fat sacs no more leaks
 
I took off the blue waterbed fittings and got the quick connects from wake makers and fly high fat sacs no more leaks
What bags did you go with? Seems the factory ones are $200 a piece at a minimum, and they seem like they were ok back when they were in good condition.
 
I think I still have the original ones up in the attic...I ended up putting 400# fat sacs on each side
 
Yes I got those then you need some plugs and the quick connect fittings. I’ve had zero issues with mine since doing that... almost immediately as my stock bags/fittings leaked badly
 
Yes I got those then you need some plugs and the quick connect fittings. I’ve had zero issues with mine since doing that... almost immediately as my stock bags/fittings leaked badly
I've sealed the crap out of my fittings, but also took off the waterbed fittings and added a legit hose clamp, with 3m 4200, then wrapped the clamp with thick flex seal tape. Just by outer bags are dry rotted to hell, so need to replace these at some point. Do you have your bags in there sideways so the fill fitting is facing the pump/engines, or on top like the pics show?
 
The ones you see on top are actually vents... on the square side there is another port for filling... at least on mine there is
 
The ones you see on top are actually vents... on the square side there is another port for filling... at least on mine there is
Ahhhhhh, awesome! Well thanks for the help. I'll add that to my off season to do list. My little one is still a bit too young to be into any wake type sports, so I've got some time.
 
Ahhhhhh, awesome! Well thanks for the help. I'll add that to my off season to do list. My little one is still a bit too young to be into any wake type sports, so I've got some time.

No problem we’re all here to help! I’ve asked plenty of questions myself!
 
Back
Top