CaptRedbeard
Jet Boat Junkie
- Messages
- 181
- Reaction score
- 250
- Points
- 132
- Location
- Omaha, NE
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 24
Link to the Yamaha start time. Is this one of us? Didn’t fair so well…
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Oh gosh. I saw this earlier on Instagram and my first thought was "wonder if this guy is on Jetboaters?"Link to the Yamaha start time. Is this one of us? Didn’t fair so well…
Shoot! Missed yours in my searches before I posted it, sorrylol
Beat you to it. I was looking for myself and found that guy. Still looking though
Trim tabs only lower the bow and/or help balance the boat, they don't do anything to raise the bow. And jet boats don't have trim controls, so they can't "trim up", just bow up from the lifting strakes. In rough waves on a jetboat you have passengers move toward the rear (or just out of the bow) and bow up like you're making a surf wake around 12mph and plow through.You have to be able to trim your bow up in water like that. He needed more throttle, and or trim tabs.
Agree trim tabs push the bow down but a lot of people on here swear by them in rough water, meaning that getting the bow down helps in the rough stuff. Does lifting the bow up actually help too?Trim tabs only lower the bow and/or help balance the boat, they don't do anything to raise the bow. And jet boats don't have trim controls, so they can't "trim up", just bow up from the lifting strakes. In rough waves on a jetboat you have passengers move toward the rear (or just out of the bow) and bow up like you're making a surf wake around 12mph and plow through.
Of course this might not help in places like Haulover Inlet when it's rough as the waves there are not normal with consistent periods or frequency - there's massive in/out tidal flow from the tide changing combing with waves from the ocean through a narrow inlet. These can cause 2x, 3x, 4x the wave amplitude by constructive interference or superposition causing irregular large waves mixed into the middle of smaller waves. Haulover Inlet can be a violent place to learn how to pilot a boat.
I think the Coast Guard should monitor it for idiots and stop them for inspections. A whole day's worth of tickets issued in an hour.
![]()
Depends how rough. Gale force did a good video on this topic.Agree trim tabs push the bow down but a lot of people on here swear by them in rough water, meaning that getting the bow down helps in the rough stuff. Does lifting the bow up actually help too?
Definitely, in windy conditions with 3-4' chop with short frequency she plows through the waves. Being on a big bay or lake with longer waves it's not as easy, but it helps. We try not to be out in conditions like that, but a few times we've been caught floating and the wind changes in minutes and starts to pick up. The big lakes around here affects our weather dramatically, going from light breeze out of the east, to 15kt westerlies in minutes. Pop up thunderstorms in summer heat come out of nowhere too. I check the marine forecast before we go out every time.Does lifting the bow up actually help too?
Link to the Yamaha start time. Is this one of us? Didn’t fair so well…
Good point on the trim tabs. I'm contemplating buying a 250, was actually at the Miami boat show this past weekend and drove a 252. It was terribly rough that day so the test drive was not the best given I will not likely be on water that rough. I did notice "significant" bow rise with this boat, vs my boat with Smart Tabs on it. We did have 6 people in the stern however, but that would be a typical load for us anyway. I can see wanting trim tabs to lift the stern, to be able to plane at lower speeds. Plus be able to balance the load as needed. It does seem that conditions like Haul Over are such that a jet boat cannot overcome, due to the inability to trim the bow up. The only solution is as you suggested, 12 mph would keep the bow high as it won't be on plane.Trim tabs only lower the bow and/or help balance the boat, they don't do anything to raise the bow. And jet boats don't have trim controls, so they can't "trim up", just bow up from the lifting strakes. In rough waves on a jetboat you have passengers move toward the rear (or just out of the bow) and bow up like you're making a surf wake around 12mph and plow through.
Of course this might not help in places like Haulover Inlet when it's rough as the waves there are not normal with consistent periods or frequency - there's massive in/out tidal flow from the tide changing combing with waves from the ocean through a narrow inlet. These can cause 2x, 3x, 4x the wave amplitude by constructive interference or superposition causing irregular large waves mixed into the middle of smaller waves. Haulover Inlet can be a violent place to learn how to pilot a boat.
I think the Coast Guard should monitor it for idiots and stop them for inspections. A whole day's worth of tickets issued in an hour.
![]()
Why do people think it's a good idea to standup when it's this rough?
Lol. I wish I was had a 25 and in the oceanAgreed - @tabbibus was that you?