Abyss underwater lights

[jocolo21]

So i got a great deal on these $155each 2 medium RGB starfish and a Large blue starfish

The install is straight forward the sent you a sticker which is a template stick to the tramsom and drill away,lol. And also tells you where to use 5200 and includes the screws. More to come as i havent wired it yet.

 

[PaulyB]

Did you get the instructions for how to hook them up? Can they be connected to any rgb controller?

 

[jocolo21]

Did you get the instructions for how to hook them up? Can they be connected to any rgb controller?

i told the guy i wanted to return it, cuz i didnt have the controller, he sent it to me with the remote.

 

[jocolo21]

so i ran out of time and wire but i installed a fuse box and ground gang behind the helm, and i took an idea out of the 272 yamaha which calls for push buttons below the throttles., I was only able to wire the Large Starfish ill finish the other later.

 

[PaulyB]

He sent me the controller, but no remote was included with the controller.

 

[jocolo21]

He sent me the controller, but no remote was included with the controller.

I would ask him, but usually any controller wil work

 

[jocolo21]

here is the link to the push buttons i used and better pics taken during day time

 

[natocamp55]

nice light setup

 

[Bluewater272]

Looks good. Getting ready to do an install myself. Were you able to access the inside of the transom where the outer two lights are? I like to put sealant on both sides of holes that are below the waterline.

 

[jocolo21]

starboard yes, port side no you will have to remove some stuff to do it. but after all day in the water yesterday no a single drop of water came out, and the hole for the transducer was huge, i use plenty of 5200 sealant