drjames1107
Jet Boat Addict
- Messages
- 119
- Reaction score
- 42
- Points
- 117
- Location
- Lake Houston
- Boat Make
- Yamaha
- Year
- 2013
- Boat Model
- Limited S
- Boat Length
- 24
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Thanks, I was not able to get through on mine but I didn't use a fish tape, probably the one tool I still need to buy. Thinking as you did, I probably would have come up a couple inches short had I not zip tied my wires where I did. But then again I still need to move my guides back a few inches so maybe just maybe I'll give it another try.@jetboater4life I used a fish tape and was able to get all the way out through the bend to the other side of the post. But.... Then decided to back up to the bend and drill a hole and pull the wire through other wise you run another 2 ft of wire trying to get back to the rear tail lights where I taped in.