Matty Slice
Well-Known Member
- Messages
- 11
- Reaction score
- 6
- Points
- 62
- Location
- Frisco, TX
- Boat Make
- Yamaha
- Year
- 2006
- Boat Model
- AR
- Boat Length
- 21
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Advice Needed Please - Minor Damage
- Thread starter Matty Slice
- Start date
JC6275
Jetboaters Admiral
- Messages
- 1,273
- Reaction score
- 797
- Points
- 267
- Location
- Clifton IL.
- Boat Make
- Yamaha
- Year
- 2001
- Boat Model
- LS
- Boat Length
- 20
I would get sealer and get it sealed up then get a gelcoat repair kit, and touch it up. Put your keel gaurd on....good as new. But you should definitely at least get sealer on it
tdonoughue
Jetboaters Admiral
- Messages
- 4,957
- Reaction score
- 4,099
- Points
- 417
- Location
- The Woodlands, TX 77381
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- AR
- Boat Length
- 24
Actually, I think you can just go to the gel coat. That will seal it.
For the keel, I would not get the color matched stuff and all. Go to West Marine (or any similar) and get a white gelcoat repair kit. Comes with a little tube of gelcoat. Let that dry and then put on your keelguard.
For the keel, I would not get the color matched stuff and all. Go to West Marine (or any similar) and get a white gelcoat repair kit. Comes with a little tube of gelcoat. Let that dry and then put on your keelguard.
