• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Anyone use carabiners for anchor?

Shookie

Jetboaters Commander
Messages
689
Reaction score
501
Points
192
Location
Cary, NC
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited S E-Series
Boat Length
24
Does anyone use a heavy duty carabiner instead of anchor shackles to connect your rope, chain, and anchor?

You can get carabiners rated for over 5000 pounds and a lot of anchor shackles I’ve looked at are much less than that so I’m just curious if there’s a good reason why you wouldn’t want to use them…
 
I ve used both and have lost anchor due to shackle bolt was loose.
I like using the "C" that threaded locking opening.
 
A carabiner with that weight capacity (typically has a self locking gate) has a larger opening than an anchor shackle; and therefore, it could hang up a little more easily on rocks, logs and etc. However, I think in most cases for most people it would not matter which you used.
 
I ve used both and have lost anchor due to shackle bolt was loose.
I like using the "C" that threaded locking opening.

Yep, I lost my original anchor because the shackle bolt came loose. I didn’t have it locked. So when I bought my new anchor I bought two anchor shackles to go with it but they wouldn’t fit through the chain so I need one more (to attach to rope) and that got me thinking about a carabiner instead.
 

Attachments

  • AF82C636-5372-4A58-AC4F-67D1322D6433.jpeg
    AF82C636-5372-4A58-AC4F-67D1322D6433.jpeg
    1.5 MB · Views: 26
Use S.S. seizing wire with a shackle. A few wraps thru the hole and back to the shackle and the bolt will not back out.

Screenshot_20200822-174214_Gallery.jpg
 
I use a stainless carabiner to clip the anchor line to the bow eye when anchored. I still tie it to a bow cleat and just clip the line to the bow eye. I find that when the line pulls from the center the boat does not swing as much.
 
I use a stainless carabiner to clip the anchor line to the bow eye when anchored. I still tie it to a bow cleat and just clip the line to the bow eye. I find that when the line pulls from the center the boat does not swing as much.
I agree I think it swings and rides better attached to the bow eye, especially when its rough..I use this below...great for adjustment and attachment..

 
Yesterday I switched out my anchor line (1/2" to 3/8") and had red loc-tite on the shackle pin that needed to be removed. I had to put it in a vice and then really lever on it to get it off. I think that's going to hold it but lI ike the zip-tie and bailing wire through the pin hole, going to add the zip tie this afternoon
 
Gonna order a heavy duty carabiner for it.... will post once I get it.
 
Gonna order a heavy duty carabiner for it.... will post once I get it.
I would suggest you use one like this. It is almost as easy to use, less expensive and far more secure that a carabiner.

1598283884537.png
 
A carabiner will probably work fine, assuming it can hold up to marine use. They are just made to open and close easily which isn't really needed for this application.
 
I bought these carabiners for another purpose, but they would work well - 5K rated, aluminium, self-locking and less than $20 for 3.






  • Favofit UIAA Certified Climbing Carabiners (Certificate No.: USA 20-5611), 3 Pack, 25KN (5620 lbs) Heavy Duty Large Locking Carabiner Clips for Rock/Ice Climbing Rappelling Rescue Swing etc.
Roll over image to zoom in

Favofit UIAA Certified Climbing Carabiners (Certificate No.: USA 20-5611), 3 Pack, 25KN (5620 lbs) Heavy Duty Large Locking Carabiner Clips for Rock/Ice Climbing Rappelling Rescue Swing etc.


  • ✅UIAA Certified Heavy Duty: This climbing carabiner is UIAA certified (Certification No.: USA 20-5611) with weight limit at 25KN (5620 lbs) for major axis, and at 7KN(1573 lbs) for minor axis and locking gate
  • ✅Auto Locking Caribeaners: these aircraft grade aluminum climbing carabiners are great for all activities like rock climbing, ice climbing, rappelling, rescue, swing, aerial yoga, camping and hiking etc.
  • ✅One Hand Operation: with the twistlock design, you can easily operate this rock climbing carabiner with one hand. With a simple twist to the barrel and push against the spring load, it will open. Once you release the spring load, it'll lock automatically immediately
  • ✅Super Lightweight: Weighs only 2 oz each, these ice climbing carabiners are prefect for minimizing the weight of your gear during any adventure
  • ✅Durable and Rustproof: Made of aircraft grade aluminum, you'll enjoy using these durable and rustproof large climbing carabiners for long time
 
This is what I use for my rear SandShark anchor. I use a 50ft line and it makes it really easy to adjust for the changing tide. I attach it to the transom strap mount. Holds 8000 lbs I think 7C5C0C7B-8124-490B-B11D-ECEC8E7619B3.jpeg
 
I use a stainless carabiner to clip the anchor line to the bow eye when anchored. I still tie it to a bow cleat and just clip the line to the bow eye. I find that when the line pulls from the center the boat does not swing as much.
How do you attach the line to the carabiner itself? Any particular knot?
 
I use the Danik to connect anchor rope to bow and stern eyes. Makes for easy adjustments. Worth the money for sure.
 
Back
Top