Brad Dunn
Jet Boat Junkie
- Messages
- 160
- Reaction score
- 39
- Points
- 137
- Location
- British Columbia
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- Other
- Boat Length
- 24
whats out there that don't break the bank. Holds knee board, wake board and surf board.
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Ar 192 2016 wake board holders
- Thread starter Brad Dunn
- Start date
d_coyne1984
Jetboaters Admiral
- Messages
- 1,015
- Reaction score
- 965
- Points
- 252
- Location
- Chanhassen, MN
- Boat Make
- Other
- Year
- 2020
- Boat Model
- Other
- Boat Length
- 21
I bought this one from Bulletlines.com for $200 plus $140 for the Swivel:
http://www.bulletlines.com/surf-board-and-wake-board-rack-p/1011.htm
It has 2 wakeboard slots and one Surfboard/Kneeboard slot. I've been very happy with it except my skim board is too thin to be held in the surfboard/kneeboard slot securely and (because my board is huge) the wakeboard forks aren't long enough. I solved this simply by coating some 1-1/4" PVC pipe with Plastidip rubberized paint coating and sliding them over the surfboard forks on the bottom. Now the board is well supported and the pipe takes up enough room of the surfboard holder so that the board doesn't have the extra room to bounce around. My Surf board is an Obrian Maha in case anybody is wondering. I highly recommend the swivel even though it's expensive. I park on a covered lift so I need it, but I have also found it handy when docking at wood pier style docks where the large wood posts would have made docking difficult on the rack side of my boat.
http://www.bulletlines.com/surf-board-and-wake-board-rack-p/1011.htm
It has 2 wakeboard slots and one Surfboard/Kneeboard slot. I've been very happy with it except my skim board is too thin to be held in the surfboard/kneeboard slot securely and (because my board is huge) the wakeboard forks aren't long enough. I solved this simply by coating some 1-1/4" PVC pipe with Plastidip rubberized paint coating and sliding them over the surfboard forks on the bottom. Now the board is well supported and the pipe takes up enough room of the surfboard holder so that the board doesn't have the extra room to bounce around. My Surf board is an Obrian Maha in case anybody is wondering. I highly recommend the swivel even though it's expensive. I park on a covered lift so I need it, but I have also found it handy when docking at wood pier style docks where the large wood posts would have made docking difficult on the rack side of my boat.
Harshhobgoblin
Jet Boat Lover
- Messages
- 43
- Reaction score
- 57
- Points
- 77
- Location
- Central, CT
- Boat Make
- Yamaha
- Year
- 2013
- Boat Model
- SX
- Boat Length
- 19
Does anyone have a good solution/rack for non-tower? Wakeboard slightly too large to fit in the ski locker so I strap onto the rear platform which is a pain.
IvanS
Jet Boat Junkie
- Messages
- 99
- Reaction score
- 72
- Points
- 137
- Location
- Fort Worth, TX
- Boat Make
- Yamaha
- Year
- 2013
- Boat Model
- AR192
- Boat Length
- 19
Dieselmore
Jet Boat Lover
- Messages
- 44
- Reaction score
- 58
- Points
- 77
- Location
- Santan valley arizona
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 19
IvanS
Jet Boat Junkie
- Messages
- 99
- Reaction score
- 72
- Points
- 137
- Location
- Fort Worth, TX
- Boat Make
- Yamaha
- Year
- 2013
- Boat Model
- AR192
- Boat Length
- 19
@Dieselmore I got a combo, wake/kneeboard from them and Im very happy with it. Very well made and finish. Is very hard to beat the price. Im glad I can help
Dieselmore
Jet Boat Lover
- Messages
- 44
- Reaction score
- 58
- Points
- 77
- Location
- Santan valley arizona
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 19
I just ordered a set I'll post some pics after the install if anyone else is curious
Dieselmore
Jet Boat Lover
- Messages
- 44
- Reaction score
- 58
- Points
- 77
- Location
- Santan valley arizona
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 19
