• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

AR 250 SIDE PANELS

ddonoso

Well-Known Member
Messages
19
Reaction score
2
Points
62
Location
CT
Boat Make
Yamaha
Year
2022
Boat Model
250
Boat Length
25
Hey Guys,

I need to replace the USB charger on my Brand new AR 250, does anyone know how to remove the port side panel?
 
No, but I can tell you that if you have access to a 2nd person, you can do this WITHOUT removing the panel. My 17 yo son and I replaced our OEM single port with a multiport and digital readout. I worked from the front, and he was able to reach the back side from within the bathroom compartment. You can reach the wire by worming your arm around the interior panel at the aft end of the bathroom, and then follow it up to the USB receptacle.

Need your helper to have reasonably long, but not body builder arms though.
 
any luck removing the panel? I'd like to remove the starboard side panel and install a 12v outlet
 
Anyone successful at removing the panel?
 
Back
Top