AR210 sub location

[Oscar0421]

I am wondering where everyone has installed their sub on a 2018 ar210. I was hoping to install mine under the rear seat but the fiberglass is not straight. The only place I can think of is on the side of the driver or behind the driver seat. I only plan to do one 10” sub.

 

[Adrian @ JB Solutions]

One the side by the passenger or drive seat works pretty well. I put two 10" IB under the passenger side bench.

 

[Oscar0421]

One the side by the passenger or drive seat works pretty well. I put two 10" IB under the passenger side bench.

the fiberglass under the rear benches is not even.

 

[Adrian @ JB Solutions]

'18 AR210 - it should be exact same as my SX210. Let me see if I can find a picture.

 

[Adrian @ JB Solutions]

No pictures of second one - but I put it right next to it.

https://jetboaters.net/attachments/img_0308-jpg.69616/

 

[Oscar0421]

Thanks! Does the pipe holding bench not rattle?

 

[Adrian @ JB Solutions]

I haven’t had any issues with it rattling.

 

[BrentM]

Ad

No pictures of second one - but I put it right next to it.

https://jetboaters.net/attachments/img_0308-jpg.69616/

that looks great. Is there enough air behind the sub?

 

[Adrian @ JB Solutions]

Ad


that looks great. Is there enough air behind the sub?

There is a few inches between the back of the sub and the hull, with that being said that area is completely open to the rest of the hull, so plenty of air.

 

[BrentM]

There is a few inches between the back of the sub and the hull, with that being said that area is completely open to the rest of the hull, so plenty of air.

Did you use a wood ring behind it or screw it directly to the fiberglass?

 

[Adrian @ JB Solutions]

Did you use a wood ring behind it or screw it directly to the fiberglass?

Yeah I used a 1/2" thick ring cut from pvc board.