AR230 re upholstery project

[shawnnoonan]

finally completed my winter project, recovered the cushions on my AR230. It was a big job but if you are interested in doing this you can buy the skins and do the installation yourself. 27 cushion covers in all. Axar Patel assisted me with getting the skins as well as with some guidance as this was the first time I ever did something like this. A pneumatic upholstery stapler, heavy duty staple remover, spray adhesive, heat gun, time and patience are what is needed. Axar was great to work with and helped guide me through the project. Some people say "never again" after doing a project like this but not me. I may have found a part time job in retirement!

 

[Sx240]

Looks good

 

[Julian]

finally completed my winter project, recovered the cushions on my AR230. It was a big job but if you are interested in doing this you can buy the skins and do the installation yourself. 27 cushion covers in all. Axar Patel assisted me with getting the skins as well as with some guidance as this was the first time I ever did something like this. A pneumatic upholstery stapler, heavy duty staple remover, spray adhesive, heat gun, time and patience are what is needed. Axar was great to work with and helped guide me through the project. Some people say "never again" after doing a project like this but not me. I may have found a part time job in retirement!View attachment 147491

Looks awesome! What/who is Axar Patel??

 

[dgfreeze]

@easyliving609, this was your work?

I wish I'd have known about this a year and a half ago, I would've gone this route. Doing it all myself was quite satisfying, but one heckuva chore.

 

[Ronnie]

What did the materials cost?

 

[sunbyrned]

finally completed my winter project, recovered the cushions on my AR230. It was a big job but if you are interested in doing this you can buy the skins and do the installation yourself. 27 cushion covers in all. Axar Patel assisted me with getting the skins as well as with some guidance as this was the first time I ever did something like this. A pneumatic upholstery stapler, heavy duty staple remover, spray adhesive, heat gun, time and patience are what is needed. Axar was great to work with and helped guide me through the project. Some people say "never again" after doing a project like this but not me. I may have found a part time job in retirement!View attachment 147491

Beautiful! Good to know!

 

[Dave burke]

Beautiful job. Where did you find the skins?

 

[dgfreeze]

I believe this is the Axar Patel he mentioned, but I could be wrong... hopefully someone can verify.

https://jetboaters.net/threads/seat-covers.28178/

 

[biffdotorg]

This is a great investment! I can see so many more of these boats getting work like this done as it is well worth the investment in this crazy boat market. It's so easy to justify a couple thousand, when your boat value has literally gone up nearly $10K!

For those asking who can do this, just about any upholstery shop can do it. If you care to recovery yourself, and just get the skins made, then you truly want someone with a good pattern.

Nice job!

 

[Brad_Ct]

I believe this is the Axar Patel he mentioned, but I could be wrong... hopefully someone can verify.

https://jetboaters.net/threads/seat-covers.28178/

Yes that is his product, started installing a set I bought from him yesterday and I must say that they fit very well.

 

[gthh]

Yes that is his product, started installing a set I bought from him yesterday and I must say that they fit very well.

Ronnie, Zipper and I want to know how much a complete set cost you-mind sharing???

 

[Brad_Ct]

Ronnie, Zipper and I want to know how much a complete set cost you-mind sharing???

They were around $1,500.

 

[Ronnie]

They were around $1,500.

That is a deal maker for me. I won’t be placing my order until next year though, I hope they have the templates for a first generation 240.

For reference: I’ve heard quotes in the $3,500 to $6,000 range so $1,500 (plus my labor) is an awesome price.

 

[Scotty_R8]

that came out really good. well done!

 

[easyliving609]

Sorry for the delay guys, been busy with work. Shawn had purchased the skins from me but, all the work minus a few cousins was all his work. Brad is completing his install now so should have a reference once done.

It does take a little effort and work to make everything fit properly( sometimes you have to go back and restretch material).

Please don't hesitate to reach out if you have any more questions or concerns.

 

[gthh]

Sorry for the delay guys, been busy with work. Shawn had purchased the skins from me but, all the work minus a few cousins was all his work. Brad is completing his install now so should have a reference once done.

It does take a little effort and work to make everything fit properly( sometimes you have to go back and restretch material).

Please don't hesitate to reach out if you have any more questions or concerns.

Hi I will be sending you a quote and delivery estimate request today. Thank you for providing such a needed service!

 

[sjbrush]

finally completed my winter project, recovered the cushions on my AR230. It was a big job but if you are interested in doing this you can buy the skins and do the installation yourself. 27 cushion covers in all. Axar Patel assisted me with getting the skins as well as with some guidance as this was the first time I ever did something like this. A pneumatic upholstery stapler, heavy duty staple remover, spray adhesive, heat gun, time and patience are what is needed. Axar was great to work with and helped guide me through the project. Some people say "never again" after doing a project like this but not me. I may have found a part time job in retirement!View attachment 147491

Nice work! Looking to replace mine shortly. Do you recall what color you went with here?

 

[DNUGENTUSMC]

They were around $1,500.

Sorry to revive an old thread, but damn, where do I get that price? JetBoatSkins looks incredible but they’re about twice as much.

 

[Brad_Ct]

Sorry to revive an old thread, but damn, where do I get that price? JetBoatSkins looks incredible but they’re about twice as much.

I got them from @TheUpholsteryGuy, there is another thread going that he says they now start at $2,150.

 

[DNUGENTUSMC]

I got them from @TheUpholsteryGuy, there is another thread going that he says they now start at $2,150.

Yikes. That’s for the the very basic too. I may just re-vinyl in solid colors for now ?