- Messages
- 18,624
- Reaction score
- 21,004
- Points
- 1,102
- Location
- Raleigh, NC 27614
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- 242X E-Series
- Boat Length
- 24
While messing with my mid cabin speaker install today I decided that the battery compartment on my 242X wasn't laid out very well and that it could be arranged better. Here is what it looks like:
After some measuring, it looked promising that I could but both batteries in line with each other, but I was going to have to move the main switches up and to the left to accomodate the batteries.
So I moved the switches, shifted the batteries, and installed my Guest dual bank charger (the blue box on the lower left).
Next, I will install the Wetsounds amp on the left side behind and under the extra switch I installed to cut off the amps from the batteries (not sure why Yamaha didn't route them to the main switch, but I want to be able to isolate them completely).
After some measuring, it looked promising that I could but both batteries in line with each other, but I was going to have to move the main switches up and to the left to accomodate the batteries.
So I moved the switches, shifted the batteries, and installed my Guest dual bank charger (the blue box on the lower left).
Next, I will install the Wetsounds amp on the left side behind and under the extra switch I installed to cut off the amps from the batteries (not sure why Yamaha didn't route them to the main switch, but I want to be able to isolate them completely).
