We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Thanks Julian, so the stock fuses from the battery to the switch are sufficient in this situation? Simply adding the inline fuse after the switch (within a foot) to the helm is enough? Thanks again
It actually has fuses on both sides.
Ahh thanks I didn’t know that was a fuse box. So I just traced the wiring from my house battery and you’re right, no fuse between the battery and house switch. The stock fuses are after the switch. I’ll place the inline after the switch and within a foot. I appreciate your help!
And the "foot" is just a guide....basically...that length of wire isn't protected....so the shorter you make it, the better.
