• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Bilge indicator light

Mkwg1111

Member
Messages
1
Reaction score
0
Points
20
Boat Make
Yamaha
Year
2018
Boat Model
242 Limited S E-Series
Boat Length
24
Why is the Bilge indicator light flashing red on dash
 
I would think that indicates the bilge pump is operating either due to water or a stuck float/sensor. If there is no water you may want to remove the pump from its holder to see if there is any debris causing it to operate. Depending on it's age you may need to replace it.
 
When it turns red that means it is running.
 
Flashing red is usually an error indication in Connext, right?
 
Any idea what an Amber indicator light means?
 
Back
Top