• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Bilge pump issue

Cbnbtx

Active Member
Messages
7
Reaction score
0
Points
40
Boat Make
Yamaha
Year
2011
Boat Model
SX
Boat Length
21
Bilge pump issue
Is there a check valve and the bilge pump hose? When water is pumping out it sprays like something is stuck in there Tried sticking a long screwdriver in there but only goes in a inch or two.
 
Bilge pump issue
Is there a check valve and the bilge pump hose? When water is pumping out it sprays like something is stuck in there Tried sticking a long screwdriver in there but only goes in a inch or two.
I don't believe there is a check valve. Try some string trimmer line down the hose.
 
Weed wacker line just "feel" the hose from it's outside connection in. Could be a nest of something in there.
 
Thanks everyone I will try that when I get home.
 
Just added a secondary bilge pump and replaced original, no check valve. Usually the mud daubers are not too far in..long zip tie, lightweight snake should do..I trailer, so when its in the driveway all ports get plugged, especially the pissers.
 
Back
Top