• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

black tape trimming the gelcoat

Eric195

Jet Boat Lover
Messages
21
Reaction score
8
Points
72
Location
Leander TX
Boat Make
Scarab
Year
2014
Boat Model
HO Impulse
Boat Length
19
around the black on the body of the boat there is thin black tape almost like electrical tape trimming the gelcoat. while pulling up the anchor a few times i rubbed it off in some places. I've been wondering is this on all Scarabs or did the dealer do this to make it look better at the time of sale? If it is on all of them what do i fix it with electrical tape?
 
around the black on the body of the boat there is thin black tape almost like electrical tape trimming the gelcoat. while pulling up the anchor a few times i rubbed it off in some places. I've been wondering is this on all Scarabs or did the dealer do this to make it look better at the time of sale? If it is on all of them what do i fix it with electrical tape?

Can you post a photo...hard to imagine what you are describing...
 
Hopefully get it back from the shop today and i'll snap some pictures.
 
Not sure why they put it on, but I didn't like it, and I pulled it off from day one.
 
Are they running this tape to cover the seam between two colors?
 
I thought it was on there to clean up the line between the two colors but I haven't seen what it is like under.
 
around the black on the body of the boat there is thin black tape almost like electrical tape trimming the gelcoat. while pulling up the anchor a few times i rubbed it off in some places. I've been wondering is this on all Scarabs or did the dealer do this to make it look better at the time of sale? If it is on all of them what do i fix it with electrical tape?

When I picked my 165 HOI up last Friday , that black pin stripe was torn a lil bit . The dealer cut a 12" section off and replace it with what they had in the service center. I do not think its electoral tape
 
My striping is coming off where the roller for the winch hits the bow. I took an exact o knife and trimmed it. I had a little black over spray, but it looks better than chewed up tape...
 
Last edited:
When I picked my 165 HOI up last Friday , that black pin stripe was torn a lil bit . The dealer cut a 12" section off and replace it with what they had in the service center. I do not think its electoral tape
Do you happen to know the width of the black pin stripe on your scarab? I have a 2014 scarab 195 HO but it is at our vacation home which we cannot travel to due to the travel band in Michigan. I would like to order the pin strip now but don't have the exact width. Thanks in advance!
 
Lazyness....to hide imperfections. I hate it.
 
It is 1/2 inch 3m marine pinstripe. I just replaced mine. Yes it is to transition the black to white on my 2019 195
 
Where you find it? I cant find any that specifies marine? Either on ebay or amazon.
 
Ok....so it's not really a marine tape, but as long as its 3M will stick! Lol...thanks
 
Back
Top