• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Bow Rail Loose

MontereyJake

Active Member
Messages
2
Reaction score
0
Points
40
Location
Traverse City, Michigan
Boat Make
Yamaha
Year
2008
Boat Model
SX
Boat Length
23
2008 SX 230.
Starboard bow rail is loose on forward end. It moves maybe 1/4" side to side. Icebox is under seat on that side. Does anyone know how that is attached (screw or nut) ? How do I gain access to the inside to tighten it?
 
I have the same issue on my ‘07 and keep putting it off. I assumed I would need to access from under the small bow seat. I am not sure my arms are long enough though
 
I just tightened mine on a newer 242. It was nuts on the inside. 14mm I think. Don't know if it's the same on yours though.
 
See if you can access it from under the front cushion
 
Check the nut size on the other side and get a long extension
 
I got to mine by crawling under the helm and using a long extension. Wasn't easy but it worked.
 
Might be easiest to just pull a speaker and go through a speaker hole.
 
Pull the speaker and the nut will be within reach.

Wear long sleeve to keep the fiberglass off your arm, not like I did when I was in there.
 
I went through the horn. Just unscrew it and pull it out. Forward end of starboard bow rail is right there.
 
Back
Top