-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Brand new boat and trailer
- Thread starter Chief fan
- Start date
Babin Farms
Jetboaters Fleet Admiral
- Messages
- 3,866
- Reaction score
- 12,771
- Points
- 507
- Location
- Lower Alabama
- Boat Make
- Yamaha
- Year
- 2009
- Boat Model
- AR
- Boat Length
- 23
Kind of a confusing post.
Is the boat getting scratched from the bunks?
How many times have you launched and retrieved?
Does it look like the boat is sitting like it should on the bunks?
Is the boat getting scratched from the bunks?
How many times have you launched and retrieved?
Does it look like the boat is sitting like it should on the bunks?
biffdotorg
Jetboaters Admiral
- Messages
- 3,519
- Reaction score
- 3,838
- Points
- 367
- Location
- Pelican Rapids, MN
- Boat Make
- Yamaha
- Year
- 2011
- Boat Model
- Limited S
- Boat Length
- 24
New boat? 2012?
Either way, dunking the whole trailer and then pulling it up to the depth you need to load solves two issues. 1. it gets the bunks wet so that the boat slides easier. 2. it rinses any sand that may have ended up on the carpeted bunks from using power to offload, or from sand blowing in a parking lot. The sand in the carpet will wear gelcote as much or more than any exposed wood.
Good luck
Either way, dunking the whole trailer and then pulling it up to the depth you need to load solves two issues. 1. it gets the bunks wet so that the boat slides easier. 2. it rinses any sand that may have ended up on the carpeted bunks from using power to offload, or from sand blowing in a parking lot. The sand in the carpet will wear gelcote as much or more than any exposed wood.
Good luck
Chief fan
Jet Boat Addict
- Messages
- 39
- Reaction score
- 12
- Points
- 117
- Boat Make
- Yamaha
- Year
- 2022
- Boat Model
- 250
- Boat Length
- 25
Thank you and yes just got a new ar250 and need to change my profile
biffdotorg
Jetboaters Admiral
- Messages
- 3,519
- Reaction score
- 3,838
- Points
- 367
- Location
- Pelican Rapids, MN
- Boat Make
- Yamaha
- Year
- 2011
- Boat Model
- Limited S
- Boat Length
- 24
Sweet, congrats on the new boat. What color is the hull that touches the bunks? If it's the '22 that is black, it's going to show everything for sure.
Chief fan
Jet Boat Addict
- Messages
- 39
- Reaction score
- 12
- Points
- 117
- Boat Make
- Yamaha
- Year
- 2022
- Boat Model
- 250
- Boat Length
- 25
Sea glass grey
fatboyroy
Jetboaters Captain
- Messages
- 1,021
- Reaction score
- 972
- Points
- 207
- Location
- Sebastian, FL
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- FSH Sport
- Boat Length
- 19
you need to post picture or the bunk gods will continue scratching it.
Similar threads
