• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Check Engine Error

GoodCubanito

Jet Boat Addict
Messages
142
Reaction score
42
Points
97
Location
Lewisville, Texas
Boat Make
Yamaha
Year
2016
Boat Model
Limited S
Boat Length
24
I am getting a check port engine alert and a constant beeping sound, any suggestions? Thanks,
 
Last edited:
I just had the check engine come on with a flashing AL on the bottom left corner. The terminals are clean and the battery has been replaced as well. My boat is an Ar195 is there a way to rest this code?
 
@GoodCubanito I think disconnecting the battery clears a lot of codes.
 
Had this error yesterday on my way back to the dock. Pulled the clean out plug on the starboard engine and found a plastic bag wrapped around the shaft. Cleared the bag and the error went away.
 
I have the same issue on my 2016 242 Limited S E-series, started both engines, backed off lift ran for 2 min then check port engine light came on, tried very thing I could think of, had good water flow on both motors, shut off both motors and port will not start back up. I hit the diagnostic button and this is what showed anyone what this could be?
 

Attachments

  • 1DAFBE41-E448-4AAE-95FC-69D71E6576F6.jpeg
    1DAFBE41-E448-4AAE-95FC-69D71E6576F6.jpeg
    2.3 MB · Views: 11
  • C32A450E-4C53-4640-81F9-2AC322366434.jpeg
    C32A450E-4C53-4640-81F9-2AC322366434.jpeg
    2.5 MB · Views: 11
Back
Top