• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Coolant Flow 2015 AR210 LAT1100B Engine

Seagar Lounger

Well-Known Member
Messages
6
Reaction score
0
Points
45
Boat Make
Yamaha
Year
2015
Boat Model
AR
Boat Length
21
Hello everyone,

I'm looking for a coolant flow diagram or some information on the raw water path through the engine. I'm troubleshooting an overheat on my port motor and I want to make sure I don't miss any passageways. I'm thinking about pulling the head but the cams are intimidating me, about to pull the exhaust manifold to see what I can see.

Any solutions for dealing with engine scale without pulling the head would be appreciated too.

Thanks everyone!!
 
First thing I would do when embarking on this quest is get yourself a dealers service manual..........they can be had at reasonable prices on line as electronics manuals and most allow you to print out a paper copy..........well worth it if you like doing service work yourself.
 
Thanks Dave, do you have a particular website you used?
 
Pulled the exhaust manifold, 1 and 4 were pretty blocked up, working on cleaning the head ports now, has anyone back flushed from the thermostat to check flow?
 
You need to pull the thermostat and check it per the service manual, or better yet drop in a new one.

Are you boating in salt water? If so are you flushing with salt away after each outing? How many hours on the engines? Do you wet slip the boat?
 
Last edited:
Back
Top