• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

E-series Bimini

AndyD

Jetboaters Commander
Messages
548
Reaction score
857
Points
187
Location
Wake Forest, NC
Boat Make
Yamaha
Year
2016
Boat Model
242 Limited S E-Series
Boat Length
24
Anybody with an E-series noticing the Bimini frame rattling or excessive bouncing during rough water or high speeds? Specifically the frame itself since it is not all in one with the tower but rather a bolted on attachment. We were on the water last weekend and the water was pretty choppy with high winds and I was noticing the canopy was bouncing more so than the prior times we had taken it out. It only connects to the tower with two knobs and they're both secured toght but I'm just curious if it's mine only or just an opportunity with the overall design construction. When we hit some heavy wakes I thought it might come loose :(
 
Anybody with an E-series noticing the Bimini frame rattling or excessive bouncing during rough water or high speeds? Specifically the frame itself since it is not all in one with the tower but rather a bolted on attachment. We were on the water last weekend and the water was pretty choppy with high winds and I was noticing the canopy was bouncing more so than the prior times we had taken it out. It only connects to the tower with two knobs and they're both secured toght but I'm just curious if it's mine only or just an opportunity with the overall design construction. When we hit some heavy wakes I thought it might come loose :(

Mine doesn't budge at all. I'm also pretty sure there are two attachment points on both sides...but not certain.
 
Mine is rock solid. You are right...ther are just the 2 bolts that attach it to the tower. Not sure why it would, or could bounce when you are underway.
 
Rock solid here too. There are the two obvious bolts and two hinge pivot points.
 
Back
Top