• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Engine alarm on my sx190 jet boat

Njefferson

Member
Messages
2
Reaction score
0
Points
20
Boat Make
Yamaha
Year
2014
Boat Model
SX
Boat Length
19
Someone help! Lol my engine alarm stays on. I disconnected battery. Replaced spark plugs. Any suggestions please thank u
 
Going to need a little more info than this.

Does the boat start up?
Are there any lights on the dash flashing?
Is there water coming out of all the pee holes on the side (cooling water indicator pee holes)?
Did the boat recently get driven in really shallow water?
Are you sure it isn't the depth gauge?
 
The boat starts. No shallow water. Water coming out of pee holes. The check engine alarm sounds when I start the boat. I have to press the m button and it turns off. It sounds every couple of minutes. I have to keep pressing the M thank u very much for your response
 
Did you ever figure this out? I’m trying to disconnect the alarm so it doesn’t keep going off until I can get it in to service.
 
Before resetting the alarm you'll probably want to find and fix why the boat is alarming, right?

If the boat is fine, you can restart it to clear the alarm. The one time I had to do this, resetting the boat by turning the batteries on/off/on/off/on/off/on/off/on DID NOT WORK. Turning the keys to the motors, with the batteries in the continued on position, on/off x3 did work.
 
What do you mean with "with the batteries in the continued on position,"?
 
Back
Top