• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Engine won't crank. Hear clicking sound and wonder if i have a bad relay

lukan734

Member
Messages
3
Reaction score
0
Points
10
Boat Make
Yamaha
Year
2023
Boat Model
AR
Boat Length
19
Engine wont start. Hearing clicking noise when key turn. Ar190 2023
 
Try jumping it at the solenoid.
 
I upload a video wonder if you see it, i'm new to the forum
 
Your boat is fairly new, I bet you have a dead battery. Charge the battery and make sure the connections are proper and tight.
 
I'd start with the battery, make sure it produces at least 12 volts, ideally 12.5+. If the battery is good, check all your connections to the battery. If that doesn't work, jump the solenoid as @Acard7 suggests. Usually a clicking sound is a bad solenoid in my experience but it's hard to believe the solenoid is bad on a new boat
 
You should test solenoid I use a remote starter switch.............Some do a screw driver across the 2 bolts to turn over the started I just hate the arching sparks like I welding something. If engine turns over using remote then starter and solenoid are fine......move on to relay and loose or corroded wires both could cause a no turn over/clicking problem.........I always look for a bad ground first boats have this problem most often. Also look at all contacts on the battery switch. A bad ground or positive wire cant handle the 100amp the starting is asking for...... so it clicks.

A bad starter relay that is bad cant hold in.......... so it clicks like others have said to.
 

Attachments

  • 61k5m1krUJL._AC_UY218_.jpg
    61k5m1krUJL._AC_UY218_.jpg
    5.3 KB · Views: 2
Back
Top