• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Error message question

Sroc

Well-Known Member
Messages
56
Reaction score
18
Points
57
Location
Michigan
Boat Make
Yamaha
Year
2021
Boat Model
252SD
Boat Length
25
Good evening I got the following error messages when I went to turn the boat on the first time of season. The boat was out of the water. I did not crank the boat over due to the error medssages. . It’s a 252SD 2021.
.TIA
 

Attachments

  • IMG_0577.jpeg
    IMG_0577.jpeg
    385.1 KB · Views: 22
  • IMG_0576.jpeg
    IMG_0576.jpeg
    389.4 KB · Views: 22
  • IMG_0575.jpeg
    IMG_0575.jpeg
    356.3 KB · Views: 20
I was going to suggest battery connections, since its several errors and just firing it up for the first time this season. Making sure you have all the negatives on..Still an issue then disconnect and reconnect with both batterys at full charge..voltage looks good initially on your screen. I don't have connext..
 
Good evening I got the following error messages when I went to turn the boat on the first time of season. The boat was out of the water. I did not crank the boat over due to the error medssages. . It’s a 252SD 2021.
.TIA

Did you have the batteries out over the winter?
 
Did you have the batteries out over the winter?
the positive terminals were disconnected for winter The Boat was stored indoors heated i did put the batteries on a charger prior to trying to start the engines I thought voltage was ok?
 
Okay.

Have you tried cycling the battery switches to see if the error goes away?
 
Cycling you mean turning the switches on and off again? I have not will give that a try today
 
Cycling you mean turning the switches on and off again? I have not will give that a try today

Yes, that will a lot of times clear errors on the connext.

If you are on the water I believe the procedure is this;

Batteries off wait five mins
batteries on
engines on for 1 mins
engines off
batteries off

Repeat that 5 times

@Julian
 
Back
Top