Flag Holder?

[2nazt]

I'm curious what people with AR are using for flag holders. I need to get one for my dive flag and quarantine flag. Anyone have a ready to buy mount set up they recommend? I read a few build ones on the site but have yet to measure our towers for size to narrow down results. Thanks in advance.

 

[Andy S]

If you are putting rod holders on your tower then I highly recommend these, http://shop.coolwaterproducts.com/Rod-Holder-Flag-Poles-fits-in-a-rod-holder_c103.htm . I purchased mine with an extra set of flag clips to fly two flags on the pole.

If you are not putting rod holders on your tower, these are very popular, http://www.overtons.com/modperl/pro...u=3133373438&gclid=CK2SnJG7sM4CFVcbgQod4zgB1Q (might find them cheaper somewhere else).

 

[2nazt]

Hmm rod holders wouldn't be a bad idea, maybe I could learn how to rod and reel fish on the boat instead of diving over the side and shooting stuff...

 

[Marvin willis]

Why not put a flag pole in the table leg on the back of the boat. That's where I put my umbrella. The foam noodle inside my table leg keeps it tight

 

[Marvin willis]

 

[2nazt]

Trying to throw a fish up there or getting in and out with my freedive fins and speargun in rougher water would be tough and could be hazardous. So I would like one to clamp on the tower but I like the idea for the umbrella at the sandbar or anchor.

 

[robert843]

I always liked this style rod holder that clamps onto the tower. The make them with either 1, 2 or 3 holders per clamp and the look sharp on the boat. Only down side is they are not really a cheap option but the are nice and useful.

 

[2nazt]

I saw the link from Air Issac products. Does anyone know if the Stryker T-Top holder would work on my tower? Not sure on the diameter size, if they have one that will fit. I'll measure my tower so I know the size tonight

 

[veedubtek]

If you are putting rod holders on your tower then I highly recommend these, http://shop.coolwaterproducts.com/Rod-Holder-Flag-Poles-fits-in-a-rod-holder_c103.htm . I purchased mine with an extra set of flag clips to fly two flags on the pole.

I have 2 of these on my ski, with 2 flags each. I also highly recommend them.

 

[piney1]

Found this thread after losing the flag I had yesterday. It was one that went into the rear light receiver. It blew out.

This is the same one Overton's has but for a bit less:
Kwik Tek FWT-1 Wakeboard Tower Flag Holder https://www.amazon.com/dp/B000OF723O/ref=cm_sw_r_cp_tai_gZVkzbXDBX2AK