We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Didn't really ask which one I should buy, but thanks for your input. FYI I got an amazing deal and can do a lot of upgrades myself and still be a couple thousand less than an SE model.
Probably won't work, pretty sure only the spark has that cutout.
The GTI uses the same step that is on all the S3 hulls. Its isnt an install for someone thats is not experienced or used to drilling the hull. You have to follow the instructions to the T because there is no second chance.
The kit does not come with a stencil, just really good instructions. Once you drill the hull, you will then tap it, and screw the allen bolts directly to the tapped holes. The holes also need to be sealed. In the GTI is somewhat difficult to get to the inner rear of the craft. Good luck!
