• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Fuel leak

Scott griffith

Jet Boat Addict
Messages
404
Reaction score
167
Points
102
Location
Pensacola fl.
Boat Make
Yamaha
Year
2003
Boat Model
SR
Boat Length
23
Hey everybody need a little help I have a leak around the rim of the fuel sending unit . What is the best way to fix thank for the help
 
Do you have the original fuel sending unit and does it read properly? If it doesn't read well, you might want to just get a new sender and it will come with a new gasket....
 
Yes I have to original unit and it only leaks when it is full and it reads right
 
O ok thanks just so I'm make sure your talking about the right part . Is it part number 28 on the diagram you sent me
 
Not to be rude but make sure you install in the correct orientation as it only goes one way. My 08 was leaking at gasket because it was installed wrong. I spun it one bolt pattern to the right and it aligned correctly.
 
Back
Top