LawRenceAr190
Well-Known Member
- Messages
- 16
- Reaction score
- 5
- Points
- 62
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- AR
- Boat Length
- 19
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Helix 7 mega side imaging
- Thread starter LawRenceAr190
- Start date
tdonoughue
Jetboaters Admiral
- Messages
- 4,944
- Reaction score
- 4,088
- Points
- 417
- Location
- The Woodlands, TX 77381
- Boat Make
- Yamaha
- Year
- 2012
- Boat Model
- AR
- Boat Length
- 24
Might be able to mount it directly to that plate at the forward side of the rudder. Looks like there is a little gap there into which you can run the wire... then you can either bolt or epoxy the transducer to that plate? That will put you forward of the rudder so you can see both sides.
That's my idea...
That's my idea...
Similar threads
