Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Well you couldn't move the top bucket by hand anyhow. Something is binding the linkeage up there on top I bet. or something is stuck in the bucket somewhere
I can pull the bucket into reverse. It’s a 212x so two motors. I’m probably 5 miles to the boat ramp. If I have both motors cranked do I still need to go idle speed to limp in?
Were you using reverse before this happened/ usually things float into the pump recess and lock up the reverse buckets you can actually release the clip where the cable attaches to the bucket and free that then work the bucket loose but be sure to return the cable the same way it came off.
Boat US is great to have in a situation like this, if you couldn't free up the bucket. for a couple hundred bucks a year they would of towed you and the family to safety if needed.
Towing on the water,
Jump Starts,
Fuel Delivery
Soft Ungroundings
Somehow the rod that’s connected to the bucket got bent. I was able to bend it back enough to engage the throttle. I’ll either order a new one or try and fix it tomorrow