• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Installing Battery in 195s

Jerlane

Jet Boat Junkie
Messages
213
Reaction score
118
Points
137
Location
Minneapolis, MN
Boat Make
Yamaha
Year
2014
Boat Model
AR
Boat Length
19
Hi, I’m putting in the single battery in my 2021 195s that I picked up in the fall. I’m planning to add a second battery, but for now it’s just one. There are four cables to hook up. One is red and clearly labeled “house.” The other three are black and only one is labeled negative. To complicate matters, there was a loose red terminal cap not on a wire and the red cable already has one on it. Shouldn’t there be a positive “start” cable, or does three negative and one positive sound right?
FWIW, I initially hooked them all up on face value and the electronics and blower all seemed to work, but I began to second guess myself before turning it over.
 
On my '21, I have 3 larger gauge grounds, one small gauge ground for the bilge and one red positive.
 
Well, I rolled the diced and cranked it up. No issues. I guess the house and starter cables must split at the on off switch.
 
Just hooked up my 2012 190 today, and I have 2 red and 2 black. If I remember right, the second red is mostly black, but had a red stripe I think.
 
Back
Top