vesder21
Jet Boat Lover
- Messages
- 186
- Reaction score
- 58
- Points
- 77
- Location
- Cleveland Ohio
- Boat Make
- Yamaha
- Year
- 2020
- Boat Model
- FSH Sport
- Boat Length
- 21
So I decided to try and upgrade my factory Jensen radio with the Kicker KMC5 unit but after connecting the 12v (Red) and Ground (black) it powers on and then restarts over and over again. It sometimes powers up for 10-15 seconds, but then kicks back off and reboots.
Do you guys think it's a voltage thing? (it says 12v+ on the screen so should be getting plenty of power) or do I have a defective head unit?
*Please ignore the wire connectors as it's a temporary thing to just see if the unit works before I make it permanent.
**The first photo is of the factory Jensen radio harness.
***The second photo is the Kicker harness that I connected red, black and one set of speaker to test.
Thoughts? Also I just noticed that I posted this in the wrong forum as it should have been posted in the "electronics" one, but I don't see a way to delete!!!
Do you guys think it's a voltage thing? (it says 12v+ on the screen so should be getting plenty of power) or do I have a defective head unit?
*Please ignore the wire connectors as it's a temporary thing to just see if the unit works before I make it permanent.
**The first photo is of the factory Jensen radio harness.
***The second photo is the Kicker harness that I connected red, black and one set of speaker to test.
Thoughts? Also I just noticed that I posted this in the wrong forum as it should have been posted in the "electronics" one, but I don't see a way to delete!!!
Attachments
Last edited: