• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

Life caulk question

yam240sx

Jet Boat Addict
Messages
404
Reaction score
133
Points
122
Boat Make
Yamaha
Year
2013
Boat Model
SX
Boat Length
24
just replaced one transom plate and used the recommended life caulk ... package says 3 days to not be tacky and 7-10 days to cure ... however mine is still a bit soft after 7 days , which concerns me if i drop in water .... thoughts ? ..Thanks
 
If its a polyurethane then it cures with moisture. Lower humidity will make it take alot longer than 7days. If it goes in the wayer tuen the water will help cure it. Just as long as its not fresh or too soft where water flow will blow it out
 
Back
Top