We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
That's all preference. I preferred the 65 because my wife loads the boat after I back down and they are easier to see, etc.
Agree. The plastic is 65" but the inner metal piece is shorter by a foot or so. I cut some of the plastic off mine and made them a little shorter to match the covers I have.
You can also mount under rail, instead of above which is what I did. For 2 reasons, 1 it makes them a littles less tall which makes them the perfect size. 2 because it gets them further away from the bunks so u don't have to worry about hitting them or anything. The pads are 65 as well I believe from beyond the wake, they pull down over the PVC .
I didn’t think the lights worked with veves since they spin freely, which is one of the reasons I ordered them. Maybe I’m wrong.
Hmmm..... I just checked and you're right - nice catch. There is a circular well on the metal verticals which suspend the pvc and allows rotation when the boat is loading. I was thinking that only the canvas wrap freely rotated. I guess I goofed and will have to leave enough wire in the metal tube for rotation and ensure proper light direction (Amber front/Red back) after we wipe down the boat on the ramp. Either that, or I make a custom extension bracket that hardmounts to the Veve metal bracket extending through the center of the rotational PVC to provide a mounting location for the light. I'll work on it and send pics when I fix it. Thanks!
The latter idea would be awesome. Veve should sell that option.
I’m sure you could set them up to not spin with a screw through the plastic tube into the metal or something.
I'm sure that would work. When you pointed out my error earlier, I considered either permanently fixing the PVC in place and relying entirely on the rotation of the canvas wrap to prevent abrasion, or a removable pin (released only at the boat ramp) to prevent any possible issue with vibrational rotation while on the road if the boat wasn't in direct contact with the canvas/pole assembly, but I'm still leaning heavily towards the custom bracket idea. I have a tendency to get bugged by things that don't work properly, and the bracket gives me the best of both options - full functionality and peace of mind that it's mistake proof.
