CigarJeff68
Jetboaters Admiral
- Messages
- 1,057
- Reaction score
- 6,531
- Points
- 337
- Location
- Clay Township, Mi
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- SX
- Boat Length
- 24
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
Looking at a 1999 Tigershark PWC, is it worth it?
- Thread starter CigarJeff68
- Start date
- Messages
- 6,019
- Reaction score
- 5,463
- Points
- 462
- Location
- Florida
- Boat Make
- Yamaha
- Year
- 2021
- Boat Model
- Other
- Boat Length
- Other
Tigershark PWC - Wikipedia. They don't make them any more but it's cheap enough that as long as it runs ok it is a small investment if you want it to steer like a fighter jet just get with me . Do check the compression. Also be sure the 2 stroke engines are not banned from any of the local lakes etc.
Last edited:
CigarJeff68
Jetboaters Admiral
- Messages
- 1,057
- Reaction score
- 6,531
- Points
- 337
- Location
- Clay Township, Mi
- Boat Make
- Yamaha
- Year
- 2019
- Boat Model
- SX
- Boat Length
- 24
Don't have to worry about the 2-stroke restriction, half the outboard motors here on Lake St.Clair are probably 2-strokes.
I will check the compression, thanks for the nugget of info.
I will check the compression, thanks for the nugget of info.
Neutron
Jetboaters Admiral
- Messages
- 3,686
- Reaction score
- 6,159
- Points
- 417
- Location
- New Bern, NC
- Boat Make
- Yamaha
- Year
- 2016
- Boat Model
- AR
- Boat Length
- 24
Just keep in mind parts are going to be hard if not impossible to find. If it was me i would look for an older seadoo or yamaha because you can get so much aftermarket cheap stuff for them. Even if its good now, if something fails that you cant get, you wont be able to even sell it
Similar threads
