Looking for a Part

[fairpilot]

Well as the boat becomes older parts are getting harder and harder to find, Im hoping someone may have a lead on a fuel filler hose for a 2006 SX230(non-HO) part #F1C-U7844-11-00 Im sure 2005 and 2004 models are same hose. I have not had any luck finding one. Message me if you have any ideas. Or where I could buy a Flexible fuel
hose this size and make my own. Thanks to all

 

[Scott griffith]

Did you try boatnet.com

 

[fairpilot]

No but i will. I have tried about 8 sites. All say not available

 

[Smassey22180]

Try http://www.babbittsonline.com/. They were able to get me a bow center cushion that all the sites said was not available. It did take 5 months though.

 

[Gym]

@fairpilot If you can't find an oem hose, all auto parts stores & West Marine sell fuel lines & hoses. I haven't looked at mine but if it's not unique I would make my own and save the $$$.

 

[CrankyGypsy]

it's 2" ID and should be rated USCG SAE J1527 Type A2.

this appears to be the exact supply Yamaha used (MPI 350-2000*):
http://www.marinepartssource.com/ne...=MPI3502000&mfg=MPI&desc=2 in. Fuel Fill Hose

*though after doing some research, this 350-2000 part number currently has a J5127 rating, which must be a newer/higher standard?


other brands:
Thermoid
http://www.fillernecksupply.com/2--...5W_Y_zx7SzZhkBEuSUzI5RS04uva-QOFekaAnvN8P8HAQ

Rubco
http://www.ebay.com/itm/Rubco-J1527...OT-/262478905382?_trksid=p2141725.m3641.l6368

 

[fairpilot]

Thanks Gym and cranky gypsy, just gotta be flexible if aftermarket i just gotta pull it off and see its shape