Looking for grill mount and grill

[Just1more]

purchasing ar240 2015..... Want to get mount and grill to fit into the table holder slot. Is there a full set up we can purchase?

 

[Bruce]

This is what I did https://jetboaters.net/threads/mounting-magma-grill-on-the-bow.2842

I had a grill that I used on top of the table. It seemed that every time I grilled people would start getting on and off of the boat. The hot grill was dangerous at the swim deck. I vastly prefer it mounted at the bow. The swim deck is open for family enjoyment while I grill in the bow.

 

[PolarXJ]

They show them on the Yamaha accessories site.

https://www.yamahapartsandaccessori...rt-gourmet-gas-grill?b=Boat&d=13|13&f=2015|97

However the parts can likely be had cheaper from different vendors.

 

[Bruce]

@JetBoatPilot has the mount to attach a Magma grill to the newer table legs for $55 https://jetboatpilot.com/index.php?id_product=329&controller=product

 

[DonWon]

I have not received pricing on this yet, but it might be more affordable than the Yamaha grill mount.
http://www.garelick.com/Side-Mount-Table-Leg-System

 

[MOA_Chaser]

https://jetboaters.net/threads/kuuma-profile-150-review-mods.2656/

They have mounting systems but it was much cheaper to make my own.

 

[Sacamano]

This is what I did https://jetboaters.net/threads/mounting-magma-grill-on-the-bow.2842

I had a grill that I used on top of the table. It seemed that every time I grilled people would start getting on and off of the boat. The hot grill was dangerous at the swim deck. I vastly prefer it mounted at the bow. The swim deck is open for family enjoyment while I grill in the bow.

I agree about the grill on the swim deck. I plan to buy this bow mount this spring. http://www.grillamount.com/index.html

 

[mark_m]

I like the grab rail mount option with the teak ... I wonder if it could work on the bow grab rail?

 

[MrMoose]

purchasing ar240 2015..... Want to get mount and grill to fit into the table holder slot. Is there a full set up we can purchase?

Did you get yourself set up for grilling on your new boat?

 

[ArmyChief]

Did you see my write-up?

https://jetboaters.net/threads/ar192-magma-kettle-2-grill-install.6262/#post-107407

 

[MrMoose]

Did you see my write-up?

https://jetboaters.net/threads/ar192-magma-kettle-2-grill-install.6262/#post-107407

You have a nice setup, and you did a great job with the write-up to share it. I'm leaning toward using the table mount on the swim platform to mount the grill on. I don't want to drill.

 

[ArmyChief]

. I don't want to drill.

Lol, drilling is inevitable

 

[Scuba_ref]

@Speedling Okay I finally got around to installing a rod holding in the boat to use for the grill. Making that first big hole in the boat left me a little queasy! I have a second rod holder that I will hold onto until I try this location and see if I want to add another elsewhere on the boat.



View attachment 23356


View attachment 23357

View attachment 23358

I drilled my first hole this past week and it made me so ill that I lost 7 pounds in a 24 hour period. I'm over it now and looking back it wasn't so bad.

If you look at the beginning of the thread https://jetboaters.net/threads/kuuma-profile-150-review-mods.2656/ you will see what @MOA_Chaser did to get his grill onto the older style table leg. Not sure if you can do something similar with your leg?

 

[tdonoughue]

The first hole is always the worst. It gets easier from there. Soon you will be adding mods everywhere...