chadweiser
Jet Boat Junkie
- Messages
- 64
- Reaction score
- 48
- Points
- 132
- Location
- west mansfield, ohio
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- AR
- Boat Length
- 24
max rpms are only around 7000 with two people. Max speed is 47mph.
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
That's very unusual in that 47mph would typically require spinning the impellers at about 7,500+ RPM or so, definitely more than 7,000... Are your impellers original/OEM or have been replaced? It would seem you may be "overpitched" but that is very unusual, I would think.max rpms are only around 7000 with two people. Max speed is 47mph.
Same here, on a hot day. I think, just about.My 2016 ar240 maxes out around 7300 rpm and will get to 47 mph with full tank and 2 adults. I’d like to get out there by myself and 1/4 tank of gas and see if I can get to 50.
I had my '16 242LSE out the other day with the bimini canvas off and about 1/3 tank with just me on it and finally hit the 50mph mark for the first time only lasted a couple seconds though lol. I'm not sure what the rpms were I'd guess around 7300ish.My 2016 ar240 maxes out around 7300 rpm and will get to 47 mph with full tank and 2 adults. I’d like to get out there by myself and 1/4 tank of gas and see if I can get to 50.
I have a 2015 SX240. Same issue. Port side motor was running finearound 7500 RPMs then gradually slowed to around 6000 and stayed. Starboard side no issues. Did You find the cause of the issue?I'm having that same problem also my starboard motor comes out at 7000 RPMs and little by little goes to 6800 RPMs my port side motor runs at 7300 RPMs when no problem it just started doing that recently anybody got any ideas for what I need to look at.
Filter issueI have a 2015 SX240. Same issue. Port side motor was running finearound 7500 RPMs then gradually slowed to around 6000 and stayed. Starboard side no issues. Did You find the cause of the issue?