Augieol65
Jet Boat Addict
- Messages
- 249
- Reaction score
- 116
- Points
- 112
- Location
- Downers Grove
- Boat Make
- Yamaha
- Year
- 2017
- Boat Model
- Limited S
- Boat Length
- 21
-
Welcome to Jetboaters.net!
We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!
Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)
-
Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.
Click Here for more information>Ride Steady group buy for JetBoaters.net members only
You can dismiss this Notice by clicking the "X" in the upper right>>>>>
Lub'n The bearing
- Thread starter Augieol65
- Start date
- Messages
- 5,891
- Reaction score
- 6,663
- Points
- 492
- Location
- Corinth, TX (DFW)
- Boat Make
- Yamaha
- Year
- 2007
- Boat Model
- AR
- Boat Length
- 23
it's delicate, it's really only a water block not a roller bearing,
if you over fill it you can break the seal allowing water to seep in, if you do decide go cautiously and less is probably better,
if you over fill it you can break the seal allowing water to seep in, if you do decide go cautiously and less is probably better,
