• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

Minor overhaul and upgrades

Riveramx

Jet Boat Addict
Messages
50
Reaction score
82
Points
97
Location
Saint Marys, Ga
Boat Make
Yamaha
Year
2013
Boat Model
SS
Boat Length
21
I did a minor overhaul on my boat. Cleaned interior passages, replaced exhaust gaskets, Painted engine and exhaust, replaced all hose clamps, installed Riva Racing ribbon delete, installed second bilge pump in aft bilge, replaced small hose clamps with plastic ones, painted oil cooler, replaced drain hoses, replaced thermostat with metered hole.
 

Attachments

  • 20200321_142757.jpg
    20200321_142757.jpg
    1.9 MB · Views: 26
  • 20200321_142759.jpg
    20200321_142759.jpg
    2.3 MB · Views: 25
  • 20200321_142806.jpg
    20200321_142806.jpg
    2.1 MB · Views: 18
  • 20200321_175816.jpg
    20200321_175816.jpg
    1.5 MB · Views: 19
  • 20200321_180153.jpg
    20200321_180153.jpg
    1.7 MB · Views: 19
  • 20200321_180205.jpg
    20200321_180205.jpg
    1.7 MB · Views: 20
  • 20200328_155450.jpg
    20200328_155450.jpg
    1.8 MB · Views: 20
  • 20200328_155504.jpg
    20200328_155504.jpg
    5.9 MB · Views: 20
  • 20200328_155617.jpg
    20200328_155617.jpg
    3.8 MB · Views: 19
  • 20200328_155627.jpg
    20200328_155627.jpg
    2.8 MB · Views: 20
  • 20200328_165823.jpg
    20200328_165823.jpg
    2.1 MB · Views: 20
  • 20200328_165827.jpg
    20200328_165827.jpg
    1.8 MB · Views: 19
  • 20200328_170451.jpg
    20200328_170451.jpg
    1.7 MB · Views: 18
  • 20200328_170727.jpg
    20200328_170727.jpg
    2.1 MB · Views: 18
  • 20200328_170732.jpg
    20200328_170732.jpg
    1.3 MB · Views: 17
  • 20200328_170939.jpg
    20200328_170939.jpg
    2 MB · Views: 16
  • 20200328_170946.jpg
    20200328_170946.jpg
    1.7 MB · Views: 15
  • 20200328_170952.jpg
    20200328_170952.jpg
    1.8 MB · Views: 14
  • 20200328_171000.jpg
    20200328_171000.jpg
    1.5 MB · Views: 13
  • 20200328_171004.jpg
    20200328_171004.jpg
    1.3 MB · Views: 13
  • 20200328_171011.jpg
    20200328_171011.jpg
    1.3 MB · Views: 14
  • 20200404_142428.jpg
    20200404_142428.jpg
    1.5 MB · Views: 14
  • 20200404_142434.jpg
    20200404_142434.jpg
    1.3 MB · Views: 12
  • 20200404_142436.jpg
    20200404_142436.jpg
    910.2 KB · Views: 11
  • 20200404_143730.jpg
    20200404_143730.jpg
    3.3 MB · Views: 11
  • 20200404_143735.jpg
    20200404_143735.jpg
    3.3 MB · Views: 12
  • 20200404_143738.jpg
    20200404_143738.jpg
    3.1 MB · Views: 12
  • 20200404_145044.jpg
    20200404_145044.jpg
    2.8 MB · Views: 12
  • 20200404_145320.jpg
    20200404_145320.jpg
    1.6 MB · Views: 13
  • 20200404_150006.jpg
    20200404_150006.jpg
    1.5 MB · Views: 28
This is how the engine compartment looks now.
 

Attachments

  • 20200506_163743.jpg
    20200506_163743.jpg
    4.2 MB · Views: 29
  • 20200506_163748.jpg
    20200506_163748.jpg
    3.9 MB · Views: 31
  • 20200506_163810.jpg
    20200506_163810.jpg
    4.9 MB · Views: 28
good job!

where are you at ? what type of water do you normally boat in? do you normally flush the engines after use?

What did you do to "clean the interior passages" ?



.
 
I live in Saint Marys GA. I boat from St. Simmons island all the way to the St. Johns river in Florida. The water here is brackish. I resently bought this boat used and it needed some TLC. I use Hammer head descaling or even radiator flush to clean the engine. I flush with clean fresh water for ten minutes per engine after each use. I installed an inline replaceable zinc for each engine. I had to mechanically and chemically clean the passages.
 
Nice work. Thanks for the pictures.
 
Back
Top