• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

My DYI car/boat port

Ronnie

Jetboaters Fleet Admiral
Messages
8,775
Reaction score
12,188
Points
667
Location
SF Bay Area
Boat Make
Yamaha
Year
2010
Boat Model
Limited S
Boat Length
24
This may not interest many of you but it’s the first time I’ve been able to cover my boat with a semi-permanent structure since I started boating (not jetskiing) over 20 years ago, so it’s long over due and I am happy to show it off.

For comparison, my boat won’t fit into the local dry stack so my only other option where being/storing on the water is concerned is to rent a slip at the local marina the cost of which is about $325 per month including shore power but excluding a lift. If I want to a lift I have to buy it and pay to have installed. The cheapest used lift that i have seen which would fit my boat is about $4k.


The car port is from Costco, I said around $275 including taxes. The additional parts (e.g. ratchet straps, screw eyes, nuts, bolts and washers) cost me about another $100. The original car port sits on top of legs that I had from an older car port which I shortened to suit my current needs. The length of each modified leg is 11’ / 132”. The canopy is held in place with ratchet straps, attached to the fence on one side and to weights on the other side. Additionally, collars were added near the top of each leg which are bolted to the fence and house ledger.

I designed this so it would be wind resistant to the extent possible since there are two wind farms near me). It’s 20’ long, 10’ wide and about 13’ high as modified. I plan to let the bow hang out the front during the boating season and let the stearn hang out the back during the off season. My rationale being that the boat bow gets sun in the morning and the stern gets it in the afternoon, it’s a lot hotter in the afternoon.
IMG_6596.jpegIMG_6597.jpegIMG_6599.jpegIMG_6602.jpegIMG_6601.jpegIMG_6605.jpegIMG_6609.jpeg
Here are some pics:
 
Not a big change but I lowered the boat port 12” and moved it back 3’. Now it provides more shade to the back of the boat.
 

Attachments

  • IMG_6760.jpeg
    IMG_6760.jpeg
    1.4 MB · Views: 4
  • IMG_6758.jpeg
    IMG_6758.jpeg
    1.9 MB · Views: 5
I did something very similar. In essence i built a hoop house with 40' sticks 1 1/4" schedule 40 uv resistant conduit. Secured it to the house on one side and the fence on the other. its about 15x25'. Used a heavy 18mil tarp to cover it and made pvc clips to hold it all in place. Whole project cost me like 500$. Well, well worth covering the boat. Also, being able to work on it in the shade and the rain is a huge plus. No HOA for the win. :winkingthumbsup"
 
Back
Top