• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter
  • Guest, we are pleased to announce that Hydrophase Ridesteady is offering an extra $100 off for JETBOATERS.NET members on any Ridesteady for Yamaha Speed Control system purchased through March 7th, 2025. Ridesteady is a speed control system (“cruise control”) that uses GPS satellites or engine RPM to keep your boat at the set speed you choose. On twin engine boats, it will also automatically synchronize your engines.

    Click Here for more information>Ride Steady group buy for JetBoaters.net members only

    You can dismiss this Notice by clicking the "X" in the upper right>>>>>

No more remote

Whats the before look like?
Nice and clean! What gauge is that?
 
Very nice man!
 
Gotta do some tweaking but had to stop to take care of the kid. All in all I like it. I wish I thought of this before I moved my stern remote in front of the throttles years before
 
I don't have that on my 08. I have my keyswitchs blower but no remote
 
Nice Job. What material did you use and how did you shape it? I replaced my radio and both remotes with new, but I'm not thrilled with the look of the new in-dash remote over the old hole. I'd like to do what you did to create a cleaner look for the new dash remote. I used a 1 gang metal electrical cover plate (painted) to fill the hole. I actually like the convenience of the remote on the dash, but the factory radio had to go. Here's a pic.
image.jpeg
 
Last edited:
image.jpeg You can see my remote in front of the cup holder. I have your remote on my stern. I used a sheet of 1/4" pvc. Cost me $3. I used a router to cut and a drymal to finish the cutting and sanding
 
You must log in or register to reply here.

Similar threads

M
Stereo Remote Communication Failure 2021 AR250
Replies
4
Views
321
MikeT29
M
Stephane Poirier
2020 242 XE. Throttle remote problem
Replies
1
Views
395
Stanfna
S
J
2006 SX 230 overheat warning light
Replies
2
Views
417
Jmowens75
J
1BadTundra
Wet Slip and Bottom Painting... Do I do it?
Replies
13
Views
640
1BadTundra
1BadTundra
kgower
Transom Remote 24 22's
Replies
5
Views
449
kgower
kgower
Back
Top